ECS4210-12T_Installation Guide
Table Of Contents
- Front Page - ECS4210-12T Installation Guide
- How to Use This Guide
- Contents
- Figures
- Tables
- Switch Description
- Installation Overview
- Switch Chassis
- Power and Grounding
- Port Connections
- Switch Management
- Troubleshooting
- Index
- Back Page
Chapter 5
| Port Connections
Understanding the Port Status LEDs
– 31 –
Understanding the Port Status LEDs
The switch includes LED indicators for each port to indicate link status and network
activity. The port LEDs are shown below and described in the following table.
Figure 16: Port Status LEDs
How to Install an SFP Transceiver
The switch provides slots for optional SFP transceivers. The supported transceiver
types are listed below:
◆ 1000BASE-SX
Port 1-8 Link/Activity LEDs Port 9-12 Link/Activity LEDs
Table 3: Port Status LEDs
LED Condition Status
1000BASE-T RJ-45 PoE Ports 1-8
Link/Activity On/Blinking Amber Port has a valid 10/100 Mbps link. Blinking
indicates traffic on the port.
On/Blinking Green Port has a valid 1000 Mbps link. Blinking indicates
traffic on the port.
Off The link is down.
Gigabit SFP Ports 9-12
Link/Activity On/Blinking Amber Port has a valid 100 Mbps link. Blinking indicates
traffic on the port.
On/Blinking Green Port has a valid 1000 Mbps link. Blinking indicates
traffic on the port.
Off The link is down.
2
1
1
2