ECS4210-12T_Installation Guide

Chapter 1 | Switch Description
Overview
– 11 –
10/100/1000BASE-T RJ-45 Ports
The switch contains ten 10/100/1000BASE-T RJ-45 ports that support 10/100/
1000BASE-T copper links to other devices. For more information, see “How to
Connect to Twisted-Pair Copper Ports” on page 33.
Gigabit SFP Slots
The switch contains two Small Form Factor Pluggable (SFP) transceiver slots that
operate up to 1 Gbps full duplex. For more information, see “How to Connect to SFP
Fiber Optic Ports” on page 36.
Figure 2: Rear Panel
AC Power Socket
The switch requires an AC power source. For more information on the switch power
input, how to connect it, and how to power-on the switch, see “How to Connect to
AC Power” on page 27.
Grounding Terminal
The switch includes a grounding terminal that must be connected to a ground
source that provides local earth potential. For more information , see “Grounding
the Chassis” on page 26.
Reset Button
Pressing the reset button on the right side front panel causes the switch to restart
or restore factory default settings. For more information, see “How to Reset the
Switch” on page 43.
Grounding Terminal Reset Button
AC Power Socket
31 2
1
2
3