Web Management Guide-R01

Chapter 2 | Using the Web Interface
Navigating the Web Browser Interface
– 50 –
Panel Display The web agent displays an image of the switch’s ports. The Mode can be set to
display different information for the ports, including Active (i.e., up or down),
Duplex (i.e., half or full duplex), or Flow Control (i.e., with or without flow control).
Front Panel Indicators
N OTE : You can open a connection to the vendor’s web site by clicking on the
Edgecore logo.
Main Menu Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Displays help for the selected page.
Refreshes the current page.
Displays the site map.
Logs out of the management interface.
Sends mail to the vendor.
Links to the vendor’s web site.
Table 3: Web Page Configuration Buttons (Continued)
Button Action
Table 4: Switch Main Menu
Menu Description Page
Dashboard Displays system information, CPU utilization, temperature, and top 5
most active interfaces.
48
System
General Provides basic system description, including contact information 70
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
71
Capability Enables support for jumbo frames;
shows the bridge extension parameters
72,
73