Web Management Guide-R01
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA (Authentication, Authorization and Accounting)
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCP Snooping
- DHCPv6 Snooping
- ND Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Packets on an Interface
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Configuring MLD Snooping and Query Parameters
- Setting Immediate Leave Status for MLD Snooping per Interface
- Specifying Static Interfaces for an IPv6 Multicast Router
- Assigning Interfaces to IPv6 Multicast Services
- Filtering MLD Query Packets on an Interface
- Showing MLD Snooping Groups and Source List
- Displaying MLD Snooping Statistics
- Filtering and Throttling MLD Groups
- Multicast VLAN Registration for IPv4
- IP Tools
- IP Configuration
- General IP Routing
- IP Services
- Appendices
Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
– 435 –
swAtcMcastStormAlarmClearTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.75 When multicast storm is detected as normal traffic,
this trap is fired.
swAtcMcastStormTcApplyTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.76 When ATC is activated, this trap is fired.
swAtcMcastStormTcReleaseTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.77 When ATC is released, this trap is fired.
stpBpduGuardPortShutdownTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.91 This trap will be sent when an interface is shut down
because of BPDU guard.
swLoopbackDetectionTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.95 This trap is sent when loopback BPDUs have been
detected.
autoUpgradeTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.104 This trap is sent when auto upgrade is executed.
swCpuUtiRisingNotification 1.3.6.1.4.1.259.10.1.53.102.2.1.0.107 This notification indicates that the CPU utilization
has risen from cpuUtiFallingThreshold to
cpuUtiRisingThreshold.
swCpuUtiFallingNotification 1.3.6.1.4.1.259.10.1.53.102.2.1.0.108 This notification indicates that the CPU utilization
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
swMemoryUtiRisingThreshold
Notification
1.3.6.1.4.1.259.10.1.53.102.2.1.0.109 This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
swMemoryUtiFallingThreshold
Notification
1.3.6.1.4.1.259.10.1.53.102.2.1.0.110 This notification indicates that the memory
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
dhcpRougeServerAttackTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.114 This trap is sent when receiving a DHCP packet from
a rouge server.
macNotificationTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.138 This trap is sent when there are changes of the
dynamic MAC addresses on the switch.
lbdDetectionTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.141 This trap is sent when a loopback condition is
detected by LBD.
lbdRecoveryTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.142 This trap is sent when a recovery is done by LBD.
sfpThresholdAlarmWarnTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.189 This trap is sent when the sfp's A/D quantity is not
within alarm/warning thresholds.
userAuthenticationFailureTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.199 This trap will be triggered if authentication fails.
userAuthenticationSuccessTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.200 This trap will be triggered if authentication is
successful.
loginTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.201 This trap is sent when user logs in.
logoutTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.202 This trap is sent when user logs out.
fileCopyTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.208 This trap is sent when file copy is executed.
If the copy action is triggered by the system, the
login user information (trapVarLoginUserName/
trapVarSessionType/
trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be a null value.
userauthCreateUserTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.209 This trap is sent when a user account is created.
userauthDeleteUserTrap 1.3.6.1.4.1.259.10.1.53.102.2.1.0.210 This trap is sent when a user account is deleted.
Table 32: Supported Notification Messages (Continued)
Model Level Group