Web Management Guide-R01
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA (Authentication, Authorization and Accounting)
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCP Snooping
- DHCPv6 Snooping
- ND Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Packets on an Interface
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Configuring MLD Snooping and Query Parameters
- Setting Immediate Leave Status for MLD Snooping per Interface
- Specifying Static Interfaces for an IPv6 Multicast Router
- Assigning Interfaces to IPv6 Multicast Services
- Filtering MLD Query Packets on an Interface
- Showing MLD Snooping Groups and Source List
- Displaying MLD Snooping Statistics
- Filtering and Throttling MLD Groups
- Multicast VLAN Registration for IPv4
- IP Tools
- IP Configuration
- General IP Routing
- IP Services
- Appendices
Chapter 12
| Security Measures
IPv6 Source Guard
– 382 –
Figure 239: Setting the Filter Type for IPv6 Source Guard
Configuring Static
Bindings for IPv6
Source Guard
Use the Security > IPv6 Source Guard > Static Binding page to bind a static address
to a port. Table entries include a MAC address, IPv6 global unicast address, entry
type (Static-IPv6-SG-Binding, Dynamic-ND-Binding, Dynamic-DHCPv6-Binding),
VLAN identifier, and port identifier.
Command Usage
◆ Traffic filtering is based only on the source IPv6 address, VLAN ID, and port
number.
◆ Static addresses entered in the source guard binding table are automatically
configured with an infinite lease time.
◆ When source guard is enabled, traffic is filtered based upon dynamic entries
learned via ND snooping, DHCPv6 snooping, or static addresses configured in
the source guard binding table.
◆ An entry with same MAC address and a different VLAN ID cannot be added to
the binding table .
◆ Static bindings are processed as follows:
■
If there is no entry with same and MAC address and IPv6 address, a new
entry is added to binding table using static IPv6 source guard binding.
■
If there is an entry with same MAC address and IPv6 address, and the type
of entry is static IPv6 source guard binding, then the new entry will replace
the old one.
■
If there is an entry with same MAC address and IPv6 address, and the type
of the entry is either a dynamic ND snooping binding or DHCPv6 snooping
binding, then the new entry will replace the old one and the entry type will
be changed to static IPv6 source guard binding.
■
Only unicast addresses are accepted for static bindings.
Parameters
These parameters are displayed:
Add
◆ Port – The port to which a static entry is bound.