Web Management Guide-R01

Chapter 10 | Quality of Service
Creating QoS Policies
– 264 –
■
Set IP DSCP – Decreases DSCP priority for out of conformance
traffic. (Range: 0-63).
■
Drop – Drops out of conformance traffic.
■
Violate – Specifies whether the traffic that exceeds the peak
information rate (PIR) will be dropped or the DSCP service level will be
reduced.
■
Set IP DSCP – Decreases DSCP priority for out of conformance
traffic. (Range: 0-63).
■
Drop – Drops out of conformance traffic.
Web Interface
To configure a policy map:
1. Click Traffic, DiffServ.
2. Select Configure Policy from the Step list.
3. Select Add from the Action list.
4. Enter a policy name.
5. Enter a description.
6. Click Add.
Figure 157: Configuring a Policy Map