Web Management Guide-R01

Chapter 4 | Interface Configuration
Sampling Traffic Flows
– 146 –
◆ Datagram Version – Sends either v4 or v5 sFlow datagrams to the receiver.
Web Interface
To configure an sFlow receiver:
1. Click Interface, sFlow.
2. Select Configure Receiver from the Step list.
3. Select Add from the Action list.
4. Fill in the parameters for the sFlow receiver and monitored traffic.
5. Click Apply.
Figure 67: Configuring an sFlow Receiver
Web Interface
To show configured receivers:
1. Click Interface, sFlow.
2. Select Configure Receiver from the Step list.
3. Select Show from the Action list.
Figure 68: Showing sFlow Receivers