CLI Reference Guide-R01

Chapter 25 | Multicast Filtering Commands
MLD Filtering and Throttling
– 707 –
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld query-drop
Console(config-if)#
ipv6
multicast-data-drop
Use this command to enable multicast data drop mode on a port interface. Use the
no form of the command to disable multicast data drop.
Syntax
[no] ipv6 multicast-data-drop
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/3
Console(config-if)#ipv6 multicast-data-drop
Console(config-if)#
show ipv6 mld filter This command displays the global and interface settings for MLD filtering.
Syntax
show ipv6 mld filter [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-28)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ipv6 mld filter
MLD filter Enabled
Console#show ipv6 mld filter interface ethernet 1/3