CLI Reference Guide-R01

Chapter 8 | Authentication Commands
AAA
– 237 –
aaa accounting
update
This command enables the sending of periodic updates to the accounting server.
Use the no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
◆ When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
◆ Using the command without specifying an interim interval enables updates,
but does not change the current interval setting.
Example
Console(config)#aaa accounting update periodic 30
Console(config)#
aaa authorization
commands
This command enables the authorization of Exec mode commands. Use the no
form to disable the authorization service.
Syntax
aaa authorization commands level {default | method-name} group {tacacs+ |
server-group}
no aaa authorization commands level {default | method-name}
level - The privilege level for executing commands. (Range: 0-15)
default - Specifies the default authorization method for service requests.
method-name - Specifies an authorization method for service requests.
(Range: 1-64 characters)
group - Specifies the server group to use.
tacacs+ - Specifies all TACACS+ hosts configured with the tacacs-server
host command.
server-group - Specifies the name of a server group configured with the
aaa group server command. (Range:1-64characters)