Web Management Guide-R01
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA (Authentication, Authorization and Accounting)
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCP Snooping
- DHCPv6 Snooping
- ND Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Packets on an Interface
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Configuring MLD Snooping and Query Parameters
- Setting Immediate Leave Status for MLD Snooping per Interface
- Specifying Static Interfaces for an IPv6 Multicast Router
- Assigning Interfaces to IPv6 Multicast Services
- Filtering MLD Query Packets on an Interface
- Showing MLD Snooping Groups and Source List
- Displaying MLD Snooping Statistics
- Filtering and Throttling MLD Groups
- Multicast VLAN Registration for IPv4
- IP Tools
- IP Configuration
- General IP Routing
- IP Services
- Appendices
Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 55 –
Configure Global
Configure Configures global bridge settings for STP, RSTP and MSTP 205
Show Information Displays STA values used for the bridge 211
Configure Interface
Configure Configures interface settings for STA 212
Show Information Displays interface settings for STA 216
MSTP Multiple Spanning Tree Algorithm 219
Configure Global 219
Add Configures initial VLAN and priority for an MST instance 219
Modify Configures the priority or an MST instance 219
Show Configures global settings for an MST instance 219
Add Member Adds VLAN members for an MST instance 219
Show Member Adds or deletes VLAN members for an MST instance 219
Show Information Displays MSTP values used for the bridge
Configure Interface 223
Configure Configures interface settings for an MST instance 223
Show Information Displays interface settings for an MST instance 223
Traffic
Rate Limit Sets the input and output rate limits for a port 227
Storm Control Sets the broadcast storm threshold for each interface 228
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be used
to trigger configured rate limits or to shut down a port
230
Configure Global Sets the time to apply the control response after traffic has exceeded
the upper threshold, and the time to release the control response after
traffic has fallen beneath the lower threshold
231
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
233
Priority
Default Priority Sets the default priority for each port or trunk 237
Queue Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
238
Trust Mode Selects DSCP or CoS priority processing 246
DSCP to DSCP Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing
245
Cos to DSCP Maps CoS/CFI values in incoming packets to per-hop behavior and drop
precedence values for priority processing
247
IP Precedence to DSCP Maps IP Precedence values to DSCP values 249
Table 4: Switch Main Menu (Continued)
Menu Description Page