Web Management Guide-R01

Chapter 13 | Basic Administration Protocols
Setting a Time Range
– 468 –
To configure a rule for a time range:
1. Click Administration, Time Range.
2. Select Add Rule from the Action list.
3. Select the name of time range from the drop-down list.
4. Select a mode option of Absolute or Periodic.
5. Fill in the required parameters for the selected mode.
6. Click Apply.
Figure 306: Add a Rule to a Time Range
To show the rules configured for a time range:
1. Click Administration, Time Range.
2. Select Show Rule from the Action list.
Figure 307: Showing the Rules Configured for a Time Range