CLI Reference Guide-R01

Chapter 7 | Flow Sampling Commands
– 215 –
instance-id - An instance ID used to identify the sampling source. (Range: 1)
owner-name - The associated receiver, to which the samples will be sent.
(Range: 1-30 alphanumeric characters)
sample-rate - The packet sampling rate, or the number of packets out of
which one sample will be taken. (Range: 256-16777215 packets)
max-header-size - The maximum size of the sFlow datagram header.
(Range: 64-256 bytes)
Default Setting
No sFlow sampling instance id configured.
Maximum Header Size: 128 bytes
Command Mode
Privileged Exec
Example
This example enables a sampling data source on Ethernet interface 1/1, an
associated receiver named “owner1”, and a sampling rate of one out of 100. The
maximum header size is also set to 200 bytes.
Console# sflow sampling interface ethernet 1/1 instance 1 receiver owner1
sampling-rate 100 max-header-size 200
Console#
The following command removes a sampling data source from Ethernet interface
1/1.
Console# no sflow sampling interface ethernet 1/1 instance 1
Console#
show sflow This command shows the global and interface settings for the sFlow process.
Syntax
show sflow [owner owner-name | interface interface]
owner-name - The associated receiver, to which the samples are sent.
(Range: 1-30 alphanumeric characters)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-18)