CLI Reference Guide-R01

Chapter 4 | System Management Commands
System Status
– 111 –
Example
Refer to the example for the running configuration file.
Related Commands
show running-config (109)
show system This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
Console#show system
System Description : ECS4130-28T-AC
System OID String : 1.3.6.1.4.1.259.10.1.53.102
System Information
System Up Time : 0 days, 5 hours, 56 minutes, and 8.67 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 90-3C-B3-8C-44-B2
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
Console#
Table 15: show system – display description
Parameter Description
System Description Brief description of device type.
System OID String MIB II object ID for switch’s network management subsystem.
System Up Time Length of time the management agent has been up.
System Name Name assigned to the switch system.
System Location Specifies the system location.
System Contact Administrator responsible for the system.
MAC Address MAC address assigned to this switch.
Web Server/Port Shows administrative status of web server and UDP port number.
Web Secure Server/Port Shows administrative status of secure web server and UDP port
number.