Web Management Guide-R04

Glossary
– 736 –
DiffServ Differentiated Services provides quality of service on large networks by employing a well-
defined set of building blocks from which a variety of aggregate forwarding behaviors may
be built. Each packet carries information (DS byte) used by each hop to give it a particular
forwarding treatment, or per-hop behavior, at each network node.
DiffServ allocates
different levels of service to users on the network with mechanisms such as traffic meters,
shapers/droppers, packet markers at the boundaries of the network.
DNS Domain Name Service. A system used for translating host names for network nodes into IP
addresses.
DSCP Differentiated Services Code Point Service. DSCP uses a six-bit tag to provide for up to 64
different forwarding behaviors. Based on network policies, different kinds of traffic can be
marked for different kinds of forwarding. The DSCP bits are mapped to the Class of Service
categories, and then into the output queues.
EAPOL Extensible Authentication Protocol over LAN. EAPOL is a client authentication protocol used
by this switch to verify the network access rights for any device that is plugged into the
switch. A user name and password is requested by the switch, and then passed to an
authentication server (e.g., RADIUS) for verification. EAPOL is implemented as part of the
IEEE 802.1X Port Authentication standard.
EUI Extended Universal Identifier is an address format used by IPv6 to identify the host portion
of the network address. The interface identifier in EUI compatible addresses is based on the
link-layer (MAC) address of an interface. Interface identifiers used in global unicast and
other IPv6 address types are 64 bits long and may be constructed in the EUI-64 format. The
modified EUI-64 format interface ID is derived from a 48-bit link-layer address by inserting
the hexadecimal number FFFE between the upper three bytes (OUI field) and the lower 3
bytes (serial number) of the link layer address. To ensure that the chosen address is from a
unique Ethernet MAC address, the 7th bit in the high-order byte is set to 1 (equivalent to
the IEEE Global/Local bit) to indicate the uniqueness of the 48-bit address.
GARP Generic Attribute Registration Protocol. GARP is a protocol that can be used by endstations
and switches to register and propagate multicast group membership information in a
switched environment so that multicast data frames are propagated only to those parts of a
switched LAN containing registered endstations. Formerly called Group Address
Registration Protocol.
GMRP Generic Multicast Registration Protocol. GMRP allows network devices to register end
stations with multicast groups. GMRP requires that any participating network devices or
end stations comply with the IEEE 802.1p standard.
GVRP GARP VLAN Registration Protocol. Defines a way for switches to exchange VLAN
information in order to register necessary VLAN members on ports along the Spanning Tree
so that VLANs defined in each switch can work automatically over a Spanning Tree network.