Web Management Guide-R04
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Layer 2 Queue Settings
- Layer 3/4 Priority Settings
- Setting Priority Processing to IP Precedence/DSCP or CoS
- Mapping Ingress DSCP Values to Internal DSCP Values
- Mapping CoS Priorities to Internal DSCP Values
- Mapping Internal DSCP Values to Egress CoS Values
- Mapping IP Precedence Values to Internal DSCP Values
- Mapping IP Port Priority to Internal DSCP Values
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA Authentication, Authorization and Accounting
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCPv4 Snooping
- DHCPv6 Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- Connectivity Fault Management
- Configuring Global Settings for CFM
- Configuring Interfaces for CFM
- Configuring CFM Maintenance Domains
- Configuring CFM Maintenance Associations
- Configuring Maintenance End Points
- Configuring Remote Maintenance End Points
- Transmitting Link Trace Messages
- Transmitting Loop Back Messages
- Transmitting Delay-Measure Requests
- Displaying Local MEPs
- Displaying Details for Local MEPs
- Displaying Local MIPs
- Displaying Remote MEPs
- Displaying Details for Remote MEPs
- Displaying the Link Trace Cache
- Displaying Fault Notification Settings
- Displaying Continuity Check Errors
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Smart Pair Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Query Packets and Multicast Data
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Multicast VLAN Registration for IPv4
- Multicast VLAN Registration for IPv6
- Basic IP Functions
- IP Configuration
- General IP Routing
- IP Services
- Appendices
- Glossary
Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 73 –
Show Shows configured IGMP filter profiles 599
Add Multicast Group Range Assigns multicast groups to selected profile 599
Show Multicast Group Range Shows multicast groups assigned to a profile 599
Configure Interface Assigns IGMP filter profiles to port interfaces and sets throttling action 602
Statistics 594
Show Query Statistics Shows statistics for query-related messages 594
Show VLAN Statistics Shows statistics for protocol messages and number of active groups 594
Show Port Statistics Shows statistics for protocol messages and number of active groups 594
Show Trunk Statistics Shows statistics for protocol messages and number of active groups 594
MLD Snooping 603
General Enables multicast filtering; configures parameters for IPv6 multicast
snooping
604
Interface Configures Immediate Leave status for a VLAN 605
Multicast Router 606
Add Static Multicast Router Assigns ports that are attached to a neighboring multicast router 606
Show Static Multicast Router Displays ports statically configured as attached to a neighboring
multicast router
606
Show Current Multicast Router Displays ports attached to a neighboring multicast router, either
through static or dynamic configuration
606
MLD Member 608
Add Static Member Statically assigns multicast addresses to the selected VLAN 608
Show Static Member Shows multicast addresses statically configured on the selected VLAN 608
Show Current Member Shows multicast addresses associated with the selected VLAN, either
through static or dynamic configuration
608
Group Information Displays known multicast groups, member ports, the means by which
each group was learned, and the corresponding source list
610
Statistics 611
Input Shows statistics for MLD ingress traffic 611
Output Shows statistics for MLD egress traffic 611
Query Shows statistics for query-related messages 611
Summary Shows summary statistics for querier and report/leave messages 611
Clear Clears all MLD statics or statistics for specified VLAN/port 611
MVR Multicast VLAN Registration 619
Configure Global Configures proxy switching and robustness value 621
Configure Domain Enables MVR for a domain, sets the MVR VLAN, forwarding priority, and
upstream source IP
623
Table 4: Switch Main Menu (Continued)
Menu Description Page