Web Management Guide-R04
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Layer 2 Queue Settings
- Layer 3/4 Priority Settings
- Setting Priority Processing to IP Precedence/DSCP or CoS
- Mapping Ingress DSCP Values to Internal DSCP Values
- Mapping CoS Priorities to Internal DSCP Values
- Mapping Internal DSCP Values to Egress CoS Values
- Mapping IP Precedence Values to Internal DSCP Values
- Mapping IP Port Priority to Internal DSCP Values
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA Authentication, Authorization and Accounting
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCPv4 Snooping
- DHCPv6 Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- Connectivity Fault Management
- Configuring Global Settings for CFM
- Configuring Interfaces for CFM
- Configuring CFM Maintenance Domains
- Configuring CFM Maintenance Associations
- Configuring Maintenance End Points
- Configuring Remote Maintenance End Points
- Transmitting Link Trace Messages
- Transmitting Loop Back Messages
- Transmitting Delay-Measure Requests
- Displaying Local MEPs
- Displaying Details for Local MEPs
- Displaying Local MIPs
- Displaying Remote MEPs
- Displaying Details for Remote MEPs
- Displaying the Link Trace Cache
- Displaying Fault Notification Settings
- Displaying Continuity Check Errors
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Smart Pair Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Query Packets and Multicast Data
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Multicast VLAN Registration for IPv4
- Multicast VLAN Registration for IPv6
- Basic IP Functions
- IP Configuration
- General IP Routing
- IP Services
- Appendices
- Glossary
Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 72 –
Cache Displays cache entries discovered by designated
name servers
698
DHCP Dynamic Host Configuration Protocol 699
Client Specifies the DHCP client identifier for an interface 699
Relay Specifies DHCP Layer 2 or Layer 3 relay service
L3 Relay Specifies DHCP relay servers 701
L2 Relay Configures DHCP relay service for attached host devices, including
DHCP option 82 information
701
Dynamic Provision Enables dynamic provisioning via DHCP 715
PPPoE Intermediate Agent 716
Configure Global Enables PPPoE IA on the switch, sets access node identifier, sets generic
error message
716
Configure Interface Enables PPPoE IA on an interface, sets trust status, enables vendor tag
stripping, sets circuit ID and remote ID
717
Show Statistics Shows statistics on PPPoE IA protocol messages 719
Multicast 575
IGMP Snooping 576
General Enables multicast filtering; configures parameters for IPv4 multicast
snooping
578
Multicast Router 582
Add Static Multicast Router Assigns ports that are attached to a neighboring multicast router 582
Show Static Multicast Router Displays ports statically configured as attached to a neighboring
multicast router
582
Show Current Multicast Router Displays ports attached to a neighboring multicast router, either
through static or dynamic configuration
582
IGMP Member 584
Add Static Member Statically assigns multicast addresses to the selected VLAN 584
Show Static Member Shows multicast addresses statically configured on the selected VLAN 584
Interface 586
Configure VLAN Configures IGMP snooping per VLAN interface 586
Show VLAN Information Shows IGMP snooping settings per VLAN interface 586
Configure Interface Configures the interface to drop IGMP query packets or all multicast
data packets
592
Forwarding Entry Displays the current multicast groups learned through IGMP Snooping 593
Filter 598
Configure General Enables IGMP filtering for the switch 599
Configure Profile 599
Add Adds IGMP filter profile; and sets access mode 599
Table 4: Switch Main Menu (Continued)
Menu Description Page