Web Management Guide-R04
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Using the Web Interface
- Basic Management Tasks
- Displaying System Information
- Displaying Hardware/Software Versions
- Configuring Support for Jumbo Frames
- Displaying Bridge Extension Capabilities
- Managing System Files
- Setting the System Clock
- Configuring the Console Port
- Configuring Telnet Settings
- Displaying CPU Utilization
- Configuring CPU Guard
- Displaying Memory Utilization
- Resetting the System
- Interface Configuration
- VLAN Configuration
- Address Table Settings
- Spanning Tree Algorithm
- Congestion Control
- Class of Service
- Layer 2 Queue Settings
- Layer 3/4 Priority Settings
- Setting Priority Processing to IP Precedence/DSCP or CoS
- Mapping Ingress DSCP Values to Internal DSCP Values
- Mapping CoS Priorities to Internal DSCP Values
- Mapping Internal DSCP Values to Egress CoS Values
- Mapping IP Precedence Values to Internal DSCP Values
- Mapping IP Port Priority to Internal DSCP Values
- Quality of Service
- VoIP Traffic Configuration
- Security Measures
- AAA Authentication, Authorization and Accounting
- Configuring User Accounts
- Web Authentication
- Network Access (MAC Address Authentication)
- Configuring HTTPS
- Configuring the Secure Shell
- Access Control Lists
- Filtering IP Addresses for Management Access
- Configuring Port Security
- Configuring 802.1X Port Authentication
- DoS Protection
- DHCPv4 Snooping
- DHCPv6 Snooping
- IPv4 Source Guard
- IPv6 Source Guard
- ARP Inspection
- Application Filter
- Basic Administration Protocols
- Configuring Event Logging
- Link Layer Discovery Protocol
- Simple Network Management Protocol
- Configuring Global Settings for SNMP
- Setting Community Access Strings
- Setting the Local Engine ID
- Specifying a Remote Engine ID
- Setting SNMPv3 Views
- Configuring SNMPv3 Groups
- Configuring Local SNMPv3 Users
- Configuring Remote SNMPv3 Users
- Specifying Trap Managers
- Creating SNMP Notification Logs
- Showing SNMP Statistics
- Remote Monitoring
- Switch Clustering
- Setting a Time Range
- Ethernet Ring Protection Switching
- OAM Configuration
- Connectivity Fault Management
- Configuring Global Settings for CFM
- Configuring Interfaces for CFM
- Configuring CFM Maintenance Domains
- Configuring CFM Maintenance Associations
- Configuring Maintenance End Points
- Configuring Remote Maintenance End Points
- Transmitting Link Trace Messages
- Transmitting Loop Back Messages
- Transmitting Delay-Measure Requests
- Displaying Local MEPs
- Displaying Details for Local MEPs
- Displaying Local MIPs
- Displaying Remote MEPs
- Displaying Details for Remote MEPs
- Displaying the Link Trace Cache
- Displaying Fault Notification Settings
- Displaying Continuity Check Errors
- OAM Configuration
- UDLD Configuration
- LBD Configuration
- Smart Pair Configuration
- Multicast Filtering
- Overview
- Layer 2 IGMP (Snooping and Query for IPv4)
- Configuring IGMP Snooping and Query Parameters
- Specifying Static Interfaces for a Multicast Router
- Assigning Interfaces to Multicast Services
- Setting IGMP Snooping Status per Interface
- Filtering IGMP Query Packets and Multicast Data
- Displaying Multicast Groups Discovered by IGMP Snooping
- Displaying IGMP Snooping Statistics
- Filtering and Throttling IGMP Groups
- MLD Snooping (Snooping and Query for IPv6)
- Multicast VLAN Registration for IPv4
- Multicast VLAN Registration for IPv6
- Basic IP Functions
- IP Configuration
- General IP Routing
- IP Services
- Appendices
- Glossary
Chapter 18
| IP Services
Dynamic Host Configuration Protocol
– 706 –
■
If the policy is “keep,” the DHCP request packet's option 82 content will
be retained. The relay agent address is inserted into the DHCP request
packet, and the switch then unicasts this packet to the DHCP server.
■
If the policy is “drop,” the original DHCP request packet is flooded onto
the VLAN which received the packet but is not relayed.
◆ DHCP reply packets received by the relay agent are handled as follows:
When the relay agent receives a DHCP reply packet with Option 82 information
over the management VLAN, it first ensures that the packet is destined for it.
■
If the RID in the DHCP reply packet is not identical with that configured on
the switch, the option 82 information is retained, and the packet is flooded
onto the VLAN through which it was received.
■
If the RID in the DHCP reply packet matches that configured on the switch,
it then removes the Option 82 information from the packet, and sends it on
as follows:
■
If the DHCP packet’s broadcast flag is on, the switch uses the circuit-id
information contained in the option 82 information fields to identify
the VLAN connected to the requesting client and then broadcasts the
DHCP reply packet to this VLAN.
■
If the DHCP packet’s broadcast flag is off, the switch uses the circuit-id
information in option 82 fields to identify the interface connected to
the requesting client and unicasts the reply packet to the client.
◆ DHCP packets are flooded onto the VLAN which received them if DHCP relay
service is enabled on the switch
and any of the following situations apply
:
■
There is no DHCP relay server set on the switch, when the switch receives a
DHCP packet.
■
A DHCP relay server has been set on the switch, when the switch receives a
DHCP request packet with a non-zero relay agent address field (that is not
the address of this switch).
■
A DHCP relay server has been set on the switch, when the switch receives
DHCP reply packet without option 82 information from the management
VLAN.
■
The reply packet contains a valid relay agent address field (that is not the
address of this switch), or receives a reply packet with a zero relay agent
address through the management VLAN.
■
A DHCP relay server has been set on the switch, and the switch receives a
reply packet on a non-management VLAN.
Parameters
These parameters are displayed: