Datasheet

Datasheet
L2 Switch
OAM
IEEE 802.3ah Link
IEEE 802.1ag Connectivity Fault Management:
Connectivity check
Loopback
Linktrace
ITU-T Y.1731 Performance and Throughput Management:
Frame Delay
Frame Delay variation
QoS Features
Priority Queues: 8 hardware queues per port
Traffic classification:
IEEE 802.1p CoS
IP Precedence
DSCP
MAC Access control list ( Source/Destination MAC, Ether type, Priority ID/
VLAN ID)
IP Standard access control list (Source IP)
IP extended access control list (Source/Destination IP, Protocol, TCP/UDP
port number)
Traffic Scheduling:
Strict Priority
Weighted Round Robin
Strict + WRR
Ingress policy map (police rate, remark CoS)
Egress policy map (police rate, remark CoS/DSCP)
Rate Limiting (Ingress and Egress, per port base):
GE: Resolution 64Kbps ~ 1,000 Mbps
Auto Traffic Control
IPv6 Features
IPv4/IPv6 Dual Protocol stack
IPv6 Address Types Stack: Unicast
IPv6 Neighbor Discovery:
Duplicate address
Address resolution
Unreachable neighbor detection
Stateless auto-configuration
Manual configuration
Remote IPv6 ping
IPv6 Telnet support
HTTP over IPv6
SNMP over IPv6
IPv6 Syslog support
IPv6 TFTP support
IPv6 MLD filter: MLD max-groups (throttling)
IPv6 ND snooping
MLD Snooping v1/v2
IPv6 source guard
DHCPv6 snooping
MVR6
TACACS IPv6
Routing
IP interface IPv4/v6: 256/128 (Shared)
IPv4/IPv6 Static Route
Host route IPv4/v6: 4K/2K
Net route IPv4/v6: 512/128
DHCP Server
RIP v1/v2
Management
Switch Management:
CLI via console port or Telnet
Web management
SNMP v1, v2c, v3
IP clustering (32 members)
Firmware & Configuration:
Firmware upgrade via TFTP/HTTP/FTP server
Dual images
Multiple configuration files
Configuration file upload/download via TFTP/HTTP/FTP server
Firmware auto upgrade
RMON (groups 1, 2, 3 and 9)
BOOTP, DHCP client for IP address assignment
DHCP dynamic provision option 66,67
SNTP/NTP IPv4/ IPv6
DNS client
Event/Error Log
Syslog
SMTP
Support LLDP (802.1ab) IPv4/ IPv6
sFlow v4, v5
Cable diagnostics
Traceroute
Traceroute6
DHCP server (8 pools, 512 IP addaress)
TWAMP probe and responder
Safety
UL (CSA 22.2. NO 60950-1 & UL60950-1)
CB (IEC60950-1)
Electromagnetic Compatibility
CE Mark
FCC Class A
CISPR Class A
BSMI
Environmental Specifications
Temperature:
0ºC to 50ºC standard operation
-10ºC to 65ºC (ECS4120-28Fv2-I)
-40℃ to 70℃ (Non-Operating)
Humidity: 10% to 90% (Non-condensing)
Power Supply
Power input
AC Power input: 100 to 240 VAC, 50/60 Hz, 1.0A
DC power input: -48 ~ -60 VAC, 3.0 A
Dying Gasp (ECS4120-28Fv2 and ECS4120-28Fv2-I only)