Manualshelf

ECS4110-52T_Quick Start Guide-R1.0

ManualsBrandsEdgecore Networks ManualsEnterpriseL2+ Gigabit Ethernet Standalone Switch
123456
Quick Start Guide
– 5 –
◆ For the SFP slots, first install SFP transceivers and then connect fiber optic
cabling to the transceiver ports.
As connections are made, check the port status LEDs to be sure the links are valid.
N
OTE
:
For further switch configuration information, refer to the Management
Guide, which is on the Documentation CD included with the switch.
Connect 62.5/125 or 50/125
multimode or 9/125 single-mode
fiber with LC connectors.