ECS4110-52T_Management Guide

C HAPTER 8 | Spanning Tree Algorithm
Configuring Global Settings for STA
– 247 –
◆ Region Revision
4
– The revision for this MSTI. (Range: 0-65535;
Default: 0)
◆ Region Name
4
– The name for this MSTI. (Maximum length: 32
characters; Default: switch’s MAC address)
◆ Max Hop Count – The maximum number of hops allowed in the MST
region before a BPDU is discarded. (Range: 1-40; Default: 20)
N OTE : Region Revision and Region Name and are both required to uniquely
identify an MST region.
WEB INTERFACE
To configure global STA settings:
1. Click Spanning Tree, STA.
2. Select Configure Global from the Step list.
3. Select Configure from the Action list.
4. Modify any of the required attributes. Note that the parameters
displayed for the spanning tree types (STP, RSTP, MSTP) varies as
described in the preceding section.
5. Click Apply
Figure 105: Configuring Global Settings for STA (STP)
4. The MST name and revision number are both required to uniquely identify an MST region.