ECS4110-52T_Management Guide

C HAPTER 29 | Power over Ethernet Commands
– 1041 –
show power inline
status
This command displays the current power status for all ports or for specific
ports.
SYNTAX
show power inline status [interface]
interface
ethernet
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-24/48)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show power inline status
Unit: 1
Compatible mode : Disabled
Time Max Used
Interface Admin Range Oper Power Power Priority
--------- -------- -------- ---- -------- -------- --------
Eth 1/ 1 Enabled -- On 34200 mW 8200 mW Low
Eth 1/ 2 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 3 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 4 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 5 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 6 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 7 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 8 Enabled -- Off 34200 mW 0 mW Low
Eth 1/ 9 Enabled -- Off 34200 mW 0 mW Low
Eth 1/10 Enabled -- Off 34200 mW 0 mW Low
Eth 1/11 Enabled -- Off 34200 mW 0 mW Low
Eth 1/12 Enabled -- Off 34200 mW 0 mW Low
.
.
.
Table 123: show power inline status - display description
Field Description
Admin The power mode set on the port (see power inline)
Time Range Time during which power is supplied
Oper The current operating power status (displays on or off)
Max Power The maximum power allocated to this port (see power inline maximum
allocation)
Used Power The current power consumption on the port in milliwatts
Priority The port’s power priority setting (see power inline priority)