ECS4110-52P_Management Guide

ManualsBrandsEdgecore Networks ManualsEnterpriseL2+ Gigabit Ethernet Standalone Switch

181

182

183

184

185

186

187

188

189

190

Table Of Contents

HAPTER

| Interface Configuration

Trunk Configuration

– 190 –

for switch-to-router trunk links where traffic through the switch is

destined for many different hosts. Do not use this mode for switch-

to-server trunk links where the destination IP address is the same

for all traffic.

■

Destination MAC Address: All traffic with the same destination

MAC address is output on the same link in a trunk. This mode works

best for switch-to-switch trunk links where traffic through the

switch is destined for many different hosts. Do not use this mode

for switch-to-router trunk links where the destination MAC address

is the same for all traffic.

■

Source and Destination IP Address: All traffic with the same

source and destination IP address is output on the same link in a

trunk. This mode works best for switch-to-router trunk links where

traffic through the switch is received from and destined for many

different hosts.

■

Source and Destination MAC Address: All traffic with the same

source and destination MAC address is output on the same link in a

trunk. This mode works best for switch-to-switch trunk links where

traffic through the switch is received from and destined for many

different hosts.

■

Source IP Address: All traffic with the same source IP address is

output on the same link in a trunk. This mode works best for

switch-to-router or switch-to-server trunk links where traffic

through the switch is received from many different hosts.

■

Source MAC Address: All traffic with the same source MAC

address is output on the same link in a trunk. This mode works best

for switch-to-switch trunk links where traffic through the switch is

received from many different hosts.

PARAMETERS

These parameters are displayed for the load balance mode:

◆ Destination IP Address - Load balancing based on destination IP

address.

◆ Destination MAC Address - Load balancing based on destination MAC

address.

◆ Source and Destination IP Address - Load balancing based on

source and destination IP address.

◆ Source and Destination MAC Address - Load balancing based on

source and destination MAC address.

◆ Source IP Address - Load balancing based on source IP address.

◆ Source MAC Address - Load balancing based on source MAC address.