ECS4110-52P_Management Guide

C HAPTER 31 | Congestion Control Commands
Automatic Traffic Control Commands
– 1071 –
snmp-server
enable port-traps
atc multicast-
control-release
This command sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been triggered and the
release timer expires. Use the no form to disable this trap.
SYNTAX
[no] snmp-server enable port-traps atc
multicast-control-release
DEFAULT SETTING
Disabled
COMMAND MODE
Interface Configuration (Ethernet)
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-
release
Console(config-if)#
RELATED COMMANDS
auto-traffic-control alarm-clear-threshold (1064)
auto-traffic-control action (1063)
auto-traffic-control release-timer (1062)
ATC Display Commands
show
auto-traffic-control
This command shows global configuration settings for automatic storm
control.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show auto-traffic-control
Storm-control: Broadcast
Apply-timer (sec) : 300
release-timer (sec) : 900
Storm-control: Multicast
Apply-timer(sec) : 300
release-timer(sec) : 900
Console#