Manualshelf

ECS4110-28T_Quick Start Guide

ManualsBrandsEdgecore Networks ManualsEnterpriseL2+ Gigabit Ethernet Standalone Switch
123456
Quick Start Guide
– 5 –
◆ For the SFP slots, first install SFP transceivers and then connect cabling to the
transceiver ports.
The SFP slots support the following transceiver types: 1000BASE-SX, 1000BASE-LX,
1000BASE-LH, 100BASE-FX, and 1000BASE-T.
As connections are made, check the port status LEDs to be sure the links are valid.
N
OTE
:
For further switch configuration information, refer to the Management
Guide, which is on the Documentation CD included with the switch.
For fiber transceivers connect 62.5/
125 or 50/125 multimode or 9/125
single-mode fiber with LC connectors.