ECS4110-28T_Quick Start Guide

Quick Start Guide
– 2 –
2. Install the Switch The switch can be mounted in a standard 19-inch rack or on a desktop or shelf.
Rack Mounting —Following your rack plan, mark the holes in the rack where the
switch will be installed. One person should lift the switch into the rack so that it is
aligned with the marked holes. A second person should secure the switch in the
rack, using four rack-mounting screws (not provided).
Desktop or Shelf Mounting —Attach the four adhesive feet to the bottom of the
switch, then set the device on a desktop, shelf, or other flat surface.
Attach the brackets to the switch,
then use the rack mounting screws
supplied with the rack to secure the
switch in the rack.
Attach the four adhesive rubber foot
pads to the recessed areas on the
bottom of the switch.