ECS4110-28T_Management Guide

Table Of Contents
A
BOUT
T
HIS
G
UIDE
– 9 –
Added the commands "clock summer-time (date)" on page 777, "clock
summer-time (predefined)" on page 778, and "clock summer-time
(recurring)" on page 779.
Updated syntax for the command "snmp-server enable traps" on
page 798.
Added the commands "snmp-server enable port-traps mac-notification"
on page 801 and "show snmp-server enable port-traps" on page 802.
Updated description of syntax for the commands "enable password" on
page 824 and "username" on page 825.
Added commands "privilege" on page 827 and "show privilege" on
page 827.
Added the commands "tacacs-server retransmit" on page 836 and
"tacacs-server timeout" on page 837.
Added the command "accounting commands" on page 844.
Updated syntax for the command "show accounting" on page 846
Added the command "dot1x max-reauth-req" on page 866.
Added the section "PPPoE Intermediate Agent" on page 880.
Added the commands "mac-learning" on page 890, "port security
mac-address-as-permanent" on page 893, and ."show port security" on
page 893.
Updated syntax and description for the command "ip dhcp snooping
information option" on page 918.
Added the command "ip dhcp snooping limit rate" on page 920.
Added the command "ip dhcp snooping information option circuit-id" on
page 922.
Added the command "clear ip dhcp snooping binding" on page 924.
Added the section "DHCPv6 Snooping" on page 926.
Updated syntax for "ip source-guard binding" on page 936 and "ip
source-guard max-binding" on page 939.
Added the command "ip source-guard mode" on page 940.
Added the command "clear ip source-guard binding blocked" on
page 941.
Updated syntax for "show ip source-guard binding" on page 942.
Added the section "IPv6 Source Guard" on page 943.