ECS4110-28T_Management Guide

C HAPTER 24 | Authentication Commands
802.1X Port Authentication
– 866 –
dot1x
max-reauth-req
This command sets the maximum number of times that the switch sends
an EAP-request/identity frame to the client before restarting the
authentication process. Use the no form to restore the default.
SYNTAX
dot1x max-reauth-req count
no dot1x max-reauth-req
count – The maximum number of requests (Range: 1-10)
DEFAULT
2
COMMAND MODE
Interface Configuration
EXAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-reauth-req 2
Console(config-if)#
dot1x max-req This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
SYNTAX
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
DEFAULT
2
COMMAND MODE
Interface Configuration
EXAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)#