ECS4110-28T_Management Guide

C HAPTER 24 | Authentication Commands
Web Server
– 848 –
EXAMPLE
Console(config)#ip http port 769
Console(config)#
RELATED COMMANDS
ip http server (848)
show system (732)
ip http server This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
SYNTAX
[no] ip http server
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip http server
Console(config)#
RELATED COMMANDS
ip http port (847)
show system (732)
ip http secure-port This command specifies the TCP port number used for HTTPS connection to
the switch’s web interface. Use the no form to restore the default port.
SYNTAX
ip http secure-port port_number
no ip http secure-port
port_number – The TCP port used for HTTPS. (Range: 1-65535)
DEFAULT SETTING
443
COMMAND MODE
Global Configuration