ECS4110-28T_Management Guide

C HAPTER 18 | General IP Routing
Configuring Static Routes
– 692 –
PARAMETERS
These parameters are displayed:
◆ Destination IP Address – IP address of the destination network,
subnetwork, or host.
◆ Netmask – Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
◆ Next Hop – IP address of the next router hop used for this route.
◆ Distance – An administrative distance indicating that this route can be
overridden by other routing information. (Range: 1-255, Default: 1)
WEB INTERFACE
To configure static routes:
1. Click IP, Routing, Static Routes.
2. Select Add from the Action List.
3. Enter the destination address, subnet mask, and next hop router.
4. Click Apply.
Figure 418: Configuring Static Routes
To display static routes:
1. Click IP, Routing, Static Routes.
2. Select Show from the Action List.