ECS4110-28T_Management Guide

C HAPTER 14 | Basic Administration Protocols
Connectivity Fault Management
– 548 –
◆ Suppressing Alarms – Shows if the specified MEP is currently
suppressing sending frames containing AIS information following the
detection of defect conditions.
WEB INTERFACE
To show detailed information for the MEPs configured on this device:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Local MEP Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Select a MEP ID.
Figure 312: Showing Detailed Information on Local MEPs
DISPLAYING
LOCAL MIPS
Use the Administration > CFM > Show Information (Show Local MIP) page
to show the MIPs on this device discovered by the CFM protocol. (For a
description of MIPs, refer to the Command Usage section under
"Configuring CFM Maintenance Domains".)
CLI REFERENCES
◆ "show ethernet cfm maintenance-points local" on page 1363