ECS4110-28T_Management Guide

C HAPTER 14 | Basic Administration Protocols
Link Layer Discovery Protocol
– 443 –
Port Details – Network Policy
10
◆ Application Type – The primary application(s) defined for this
network policy:
■
Voice
■
Voice Signaling
■
Guest Signaling
■
Guest Voice Signaling
■
Softphone Voice
■
Video Conferencing
■
Streaming Video
■
Video Signaling
◆ Tagged Flag – Indicates whether the specified application type is
using a tagged or untagged VLAN.
◆ Layer 2 Priority – The Layer 2 priority to be used for the specified
application type. This field may specify one of eight priority levels
(0-7), where a value of 0 represents use of the default priority.
◆ Unknown Policy Flag – Indicates that an endpoint device wants to
explicitly advertise that this policy is required by the device, but is
currently unknown.
◆ VLAN ID – The VLAN identifier (VID) for the port as defined in IEEE
802.1Q. A value of zero indicates that the port is using priority tagged
frames, meaning that only the IEEE 802.1D priority level is significant
and the default PVID of the ingress port is used instead.
◆ DSCP Value – The DSCP value to be used to provide Diffserv node
behavior for the specified application type. This field may contain one of
64 code point values (0-63). A value of 0 represents use of the default
DSCP value as defined in RFC 2475.
Port Details – Location Identification
10
◆ Location Data Format – Any of these location ID data formats:
■
Coordinate-based LCI
11
– Defined in RFC 3825, includes latitude
resolution, latitude, longitude resolution, longitude, altitude type,
altitude resolution, altitude, and datum.
■
Civic Address LCI
11
– Includes What, Country code, CA type, CA
length and CA value. “What” is described as the field entry “Device
entry refers to” under “Configuring LLDP Interface Attributes.” Th e
the other items and described under “Configuring LLDP Interface
Civic-Address.”
11. Location Configuration Information