ECS4110-28T_Management Guide

C HAPTER 13 | Security Measures
Configuring User Accounts
– 326 –
To display a the configured authorization method and assigned server
groups for The Exec service type:
1. Click Security, AAA, Authorization.
2. Select Show Information from the Step list.
Figure 166: Displaying the Applied AAA Authorization Method
CONFIGURING USER ACCOUNTS
Use the Security > User Accounts page to control management access to
the switch based on manually configured user names and passwords.
CLI REFERENCES
◆ "User Accounts and Privilege Levels" on page 824
COMMAND USAGE
◆ The default guest name is “guest” with the password “guest.” The
default administrator name is “admin” with the password “admin.”
◆ The guest only has read access for most configuration parameters.
However, the administrator has write access for all parameters
governing the onboard agent. You should therefore assign a new
administrator password as soon as possible, and store it in a safe place.
PARAMETERS
These parameters are displayed:
◆ User Name – The name of the user.
(Maximum length: 32 characters; maximum number of users: 16)
◆ Access Level – Specifies command access privileges. (Range: 0-15)
Level 0, 8 and 15 are designed for users (guest), managers (network
maintenance), and administrators (top-level access). The other levels
can be used to configured specialized access profiles.
Level 0-7 provide the same default access to a limited number of
commands which display the current status of the switch, as well as
several database clear and reset functions. These commands are
equivalent to those available under Normal Exec command mode in the
CLI.