ECS4110-28T_Management Guide

C HAPTER 5 | Interface Configuration
Port Configuration
– 171 –
PARAMETERS
These parameters are displayed:
◆ Port – Port number. (Range:
25-28/49-52 )
◆ General – Information on connector type and vendor-related
parameters.
◆ DDM Information – Information on temperature, supply voltage,
laser bias current, laser power, and received optical power.
The switch can display diagnostic information for SFP modules which
support the SFF-8472 Specification for Diagnostic Monitoring Interface
for Optical Transceivers. This information allows administrators to
remotely diagnose problems with optical devices. This feature, referred
to as Digital Diagnostic Monitoring (DDM) provides information on
transceiver parameters.
WEB INTERFACE
To display identifying information and functional parameters for optical
transceivers:
1. Click Interface, Port, Transceiver.
2. Select a port from the scroll-down list.
Figure 41: Displaying Transceiver Data