ECS4110-28T_Management Guide

C HAPTER 46 | IP Interface Commands
IPv4 Interface
– 1431 –
show arp This command displays entries in the Address Resolution Protocol (ARP)
cache.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
This command displays information about the ARP cache. The first line
shows the cache timeout. It also shows each cache entry, including the IP
address, MAC address, type (static, dynamic, other), and VLAN interface.
Note that entry type “other” indicates local addresses for this router.
EXAMPLE
This example displays all entries in the ARP cache.
Console#show arp
ARP Cache Timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
10.1.0.0 FF-FF-FF-FF-FF-FF other VLAN1
10.1.0.254 00-00-AB-CD-00-00 other VLAN1
10.1.0.255 FF-FF-FF-FF-FF-FF other VLAN1
145.30.20.23 09-50-40-30-20-10 dynamic VLAN3
Total entry : 5
Console#