ECS4110-28T_Management Guide

C HAPTER 40 | Multicast Filtering Commands
MVR for IPv6
– 1315 –
EXAMPLE
Console#clear mvr6 groups dynamic
Console#
clear mvr6 statistics Use this command to clear the MVR6 statistics.
SYNTAX
clear mvr6 statistics [interface {ethernet unit/port |
port-channel channel-id | vlan vlan-id}]
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id (Range: 1-4094)
COMMAND MODE
Privileged Exec
COMMAND USAGE
If the interface option is not used then all MVR6 statistics are cleared.
Otherwise using the interface option will only clear the MVR6 statistics of
the specified interface.
EXAMPLE
The following shows how to clear all the MVR6 statistics:
Console#clear mvr6 statistics
Console#
show mvr6 This command shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current number of group
addresses, and the upstream source IP address.
SYNTAX
show mvr6 [domain domain-id]
domain-id - An independent multicast domain. (Range: 1-5)
DEFAULT SETTING
Displays configuration settings for all MVR domains.
COMMAND MODE
Privileged Exec