ECS4110-28T_Management Guide

C HAPTER 38 | Class of Service Commands
Priority Commands (Layer 3 and 4)
– 1206 –
show qos map
phb-queue
This command shows internal per-hop behavior to hardware queue map.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show qos map phb-queue
PHB Queue Map:
PHB: 0 1 2 3 4 5 6 7
-------------------------------------------------------
Queue: 1 0 0 1 2 2 3 3
Console#
show qos map
trust-mode
This command shows the QoS mapping mode.
SYNTAX
show qos map trust-mode interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
COMMAND MODE
Privileged Exec
EXAMPLE
The following shows that the trust mode is set to CoS:
Console#show qos map trust-mode interface ethernet 1/5
Information of Eth 1/5
CoS Map Mode: CoS mode
Console#