ECS4110-28T_Management Guide

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 110 –
Add Member Adds VLAN members for an MST instance 257
Show Member Adds or deletes VLAN members for an MST instance 257
Show Information Shows global settings for an MST instance 257
Configure Interface 261
Configure Configures interface settings for an MST instance 261
Show Information Displays interface settings for an MST instance 261
Traffic
Rate Limit Sets the input and output rate limits for a port 263
Storm Control Sets the traffic storm threshold for each interface 264
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
266
Configure Global Sets the time to apply the control response after traffic has
exceeded the upper threshold, and the time to release the control
response after traffic has fallen beneath the lower threshold
268
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a
response of rate limiting, or to send related SNMP trap messages
269
Priority
Default Priority Sets the default priority for each port or trunk 273
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
274
Trust Mode Selects IP Precedence, DSCP or CoS priority processing 280
DSCP to DSCP 281
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
281
Show Shows the DSCP to DSCP mapping list 281
CoS to DSCP 283
Add Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
283
Show Shows the CoS to DSCP mapping list 283
PHB to Queue 277
Add Maps internal per-hop behavior values to hardware queues 277
Show Shows the PHB to Queue mapping list 277
DiffServ 287
Configure Class 288
Add Creates a class map for a type of traffic 288
Show Shows configured class maps 288
Modify Modifies the name of a class map 288
Add Rule Configures the criteria used to classify ingress traffic 288
Show Rule Shows the traffic classification rules for a class map 288
Table 6: Switch Main Menu (Continued)
Menu Description Page