ECS4110-28T_Management Guide

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 108 –
Statistics Shows Interface, Etherlike, and RMON port statistics 166
Chart Shows Interface, Etherlike, and RMON port statistics 166
Load Balance Sets the load-distribution method among ports in aggregated links
Green Ethernet Adjusts the power provided to ports based on the length
of the cable used to connect to other devices
191
RSPAN Mirrors traffic from remote switches for analysis at a destination
port on the local switch
162
Traffic Segmentation 193
Configure Global Enables traffic segmentation globally 193
Configure Session Configures the uplink and down-link ports for a segmented group
of ports
194
VLAN Trunking Allows unknown VLAN groups to pass through the specified
interface
196
VLAN Virtual LAN 199
Static
Add Creates VLAN groups 202
Show Displays configured VLAN groups 202
Modify Configures group name and administrative status 202
Edit Member by VLAN Specifies VLAN attributes per VLAN 205
Edit Member by Interface Specifies VLAN attributes per interface 205
Edit Member by Interface Range Specifies VLAN attributes per interface range 205
Dynamic 209
Configure General Enables GVRP VLAN registration protocol globally 209
Configure Interface Configures GVRP status and timers per interface 209
Show Dynamic VLAN 209
Show VLAN Shows the VLANs this switch has joined through GVRP 209
Show VLAN Member Shows the interfaces assigned to a VLAN through GVRP 209
Tunnel IEEE 802.1Q (QinQ) Tunneling 212
Configure Global Sets tunnel mode for the switch 216
Configure Interface Sets the tunnel mode for any participating interface 219
Protocol 220
Configure Protocol 221
Add Creates a protocol group, specifying supported protocols 221
Show Shows configured protocol groups 221
Configure Interface 222
Add Maps a protocol group to a VLAN 222
Show Shows the protocol groups mapped to each VLAN 222
Table 6: Switch Main Menu (Continued)
Menu Description Page