ECS4110-28T_Management Guide

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 106 –
MAIN MENU Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 6: Switch Main Menu
Menu Description Page
System
General Provides basic system description, including contact information 123
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
125
Capability Enables support for jumbo frames;
shows the bridge extension parameters
126,
127
File 129
Copy Allows the transfer and copying files 129
Set Startup Sets the startup file 132
Show Shows the files stored in flash memory; allows deletion of files 132
Automatic Operation Code Upgrade Automatically upgrades operation code if a newer version is
found on the server
133
Time 137
Configure General
Manual Manually sets the current time 137
SNTP Configures SNTP polling interval 138
NTP Configures NTP authentication parameters 139
Configure Time Server Configures a list of SNTP servers 140
Configure SNTP Server Sets the IP address for SNTP time servers 140
Add NTP Server Adds NTP time server and index of authentication key 141
Show NTP Server Shows list of configured NTP time servers 141
Add NTP Authentication Key Adds key index and corresponding MD5 key 142
Show NTP Authentication Key Shows list of configured authentication keys 142
Configure Time Zone Sets the local time zone for the system clock 144
Console Sets console port connection parameters 145
Telnet Sets Telnet connection parameters 146
CPU Utilization Displays information on CPU utilization 148
Memory Status Shows memory utilization parameters 149
Reset Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
150
Interface 155
Port 156
General
Configure by Port List Configures connection settings per port 156
Configure by Port Range Configures connection settings for a range of ports 158