ECS4110-28T_Management Guide

C HAPTER 29 | Power over Ethernet Commands
– 1040 –
■
If priority is not set for any ports, and PoE consumption exceeds the
maximum power provided by the switch, power is shut down in the
following sequence:
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#power inline priority 2
Console(config-if)#
power inline
time-range
This command binds a time-range to a port during which PoE is supplied to
the attached device. Use the no form to remove this binding.
SYNTAX
power inline time-range time-range-name
no power inline time-range
time-range-name - Name of the time range.
(Range: 1-30 characters)
DEFAULT SETTING
None
COMMAND MODE
Interface Configuration
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#power inline time-range rd
Console(config-if)#
RELATED COMMANDS
time-range (783)
Table 122: PoE Shut Down Sequence
Switch PoE Port Shut Down Sequence
ECS4110-28P 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 24, 23, 22, 21, 20, 19,
18, 17, 16, 15, 14, 13
ECS4110-52P 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 24, 23, 22, 21, 20,
19, 18, 17, 16, 15, 14, 13, 36, 35, 34, 33, 32, 31, 30, 29,
28, 27, 26, 25, 48, 47, 46, 45, 44, 43, 42, 41, 40, 39, 38, 37