ECS4110-28T_Installation Guide-R03

Chapter 5 | Port Connections
Understanding the Port Status LEDs
– 29 –
Understanding the Port Status LEDs
The switch includes LED indicators for each port to indicate link status and network
activity. The port LEDs are shown below and described in the following table.
Figure 15: Port Status LEDs
Port 1-24 Link/Activity LEDs Port 25-28 Link/Activity LEDs
Table 3: Port Status LEDs
LED Condition Status
1000BASET RJ-45 Ports (1-24)
Link/Activity On/Blinking Amber Port has a valid 10/100 Mbps link. Blinking
indicates traffic on the port.
On/Blinking Green Port has a valid 1000 Mbps link. Blinking indicates
traffic on the port.
Off The link is down.
Gigabit SFP Ports (25-28)
Link/Activity On/Blinking Amber Port has a valid 100 Mbps link (low speed). Blinking
indicates traffic on the port.
On/Blinking Green Port has a valid 1000 Mbps link (high speed).
Blinking indicates traffic on the port.
Off The link is down.
2
1
1
2