ECS4110-28T_Installation Guide-R03
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Switch Description
- Installation Overview
- Switch Chassis
- Power and Grounding
- Port Connections
- Switch Management
- Troubleshooting
- Index
Chapter 1
| Switch Description
Overview
– 12 –
Port LEDs
For information on port status LED indicators, see “Understanding the Port Status
LEDs” on page 29.
Figure 2: Rear Panel
Console Port
The RJ-45 connector on the front panel far right side that is labeled “Console”
provides an out-of-band serial connection to a terminal or a PC running terminal
emulation software. The port can be used for performing switch monitoring and
configuration. For more information, see “How to Connect to the Console Port” on
page 40.
Cooling Fans and Vents
It is recommended that the switch is installed in a properly cooled and ventilated
environment. For more information, see “Switch Cooling Requirements” on
page 23.
AC Power Socket
The switch requires a 100-240 VAC, 50-60 Hz AC power source. For more
information on the switch power input, how to connect it, and how to power-on
the switch, see “How to Connect to AC Power” on page 26.
Reset Button
AC Power Socket
2
1
1
2