ECS4110-28P_Management Guide

C HAPTER 15 | Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
– 601 –
WEB INTERFACE
To statically assign an interface to an IPv6 multicast service:
1. Click Multicast, MLD Snooping, MLD Member.
2. Select Add Static Member from the Action list.
3. Select the VLAN that will propagate the multicast service, specify the
interface attached to a multicast service (through an MLD-enabled
switch or multicast router), and enter the multicast IP address.
4. Click Apply.
Figure 350: Assigning an Interface to an IPv6 Multicast Service
To show the static interfaces assigned to an IPv6 multicast service:
1. Click Multicast, MLD Snooping, MLD Member.
2. Select Show Static Member from the Action list.
3. Select the VLAN for which to display this information.
Figure 351: Showing Static Interfaces Assigned to an IPv6 Multicast Service