ECS4100 Series Web Management Guide-R07

Chapter 13 | Basic Administration Protocols
Simple Network Management Protocol
– 427 –
◆ Access Mode – Specifies the access rights for the community string:
■
Read-Only – Authorized management stations are only able to retrieve
MIB objects.
■
Read/Write – Authorized management stations are able to both retrieve
and modify MIB objects.
Web Interface
To set a community access string:
1. Click Administration, SNMP.
2. Select Configure Community from the Step list.
3. Select Add from the Action list.
4. Add new community strings as required, and select the corresponding access
rights from the Access Mode list.
5. Click Apply
Figure 262: Setting Community Access Strings
To show the community access strings:
1. Click Administration, SNMP.
2. Select Configure Community from the Step list.
3. Select Show from the Action list.
Figure 263: Showing Community Access Strings