ECS4100 Series CLI Reference Guide-R07

Chapter 27 | Multicast Filtering Commands
IGMP Snooping
– 681 –
Version Exclusive : Using global status (Disabled)
Immediate Leave : Disabled
Last Member Query Interval : 10 (unit: 1/10s)
Last Member Query Count : 2
General Query Suppression : Disabled
Query Interval : 125
Query Response Interval : 100 (unit: 1/10s)
Proxy Query Address : 0.0.0.0
Proxy Reporting : Using global status (Disabled)
Multicast Router Discovery : Disabled
VLAN Static Group Port
M: static group is for member port
U: static group is for uplink
---- --------------- --------
1 224.1.1.1 Eth 1/ 1(M)
.
.
show ip igmp
snooping interface
This command shows the IGMP snooping immediate leave status on the specified
interface.
Syntax
show ip igmp snooping interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#show ip igmp snooping interface ethernet 1/2
Interface Immediate-leave
--------- ---------------
Eth 1/2 Enabled
Console#
show ip igmp
snooping group
This command shows known multicast group, source, and host port mappings for
the specified VLAN interface, or for all interfaces if none is specified.
Syntax
show ip igmp snooping group [host-ip-addr [ip-address | interface [ip-
address] | vlan-id [interface [ip-address]] | igmpsnp | sort-by-port [ip-address |