ECS4100 Series CLI Reference Guide-R07

Chapter 26 | Quality of Service Commands
– 659 –
show policy-map This command displays the QoS policy maps which define classification criteria for
ingress or egress traffic, and may include policers for bandwidth limitations.
Syntax
show policy-map [policy-map-name [class class-map-name]]
policy-map-name - Name of the policy map. (Range: 1-32 characters)
class-map-name - Name of the class map. (Range: 1-32 characters)
Default Setting
Displays all policy maps and all classes.
Command Mode
Privileged Exec
Example
Console#show policy-map
Policy Map pmap
Description:
class map
set CoS 3
police rate 10000
Console#
show policy-map
interface
This command displays the service policy assigned to the specified interface.
Syntax
show policy-map interface [interface {input | output]
interface
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
input - Apply to the input traffic.
output - Apply to the output traffic.
Command Mode
Privileged Exec
Example
Console#show policy-map interface 1/2 input
Interface ethernet 1/2
service-policy input rdpolicy
Console#show policy-map interface 1/2 output
Interface ethernet 1/2