ECS4100 Series CLI Reference Guide-R07

Chapter 24 | ERPS Commands
– 635 –
This example displays a summary of all the ERPS instances configured on the
switch.
Console#show erps instance
ERPS Status : Disabled
ERPS node-id : B8-6A-97-41-F3-83
Number of ERPS Inst : 1
Instance ID Enabled Physical Ring Ctrl VLAN Node State Node Type
------------ --- ------- ------------- --------- ---------- ------------
test1 1 No Init None
W/E Interface Port State Local SF Local FS Local MS MEP RPL
---- --------- ---------- -------- -------- -------- ---- ---
West Unknown No No No No
East Unknown No No No No
Inclusion VLAN groups
---------------------------------------------------------------
None
Console#
Table 122: show erps r ing - summary display description
Field Description
ERPS Status Shows whether ERPS is enabled on the switch.
ERPS node-id ERPS node identifier used in R-APS messages.
Number of ERPS Ring Shows the number of ERPS rings configured on the switch.
Ring Displays the name of each ring followed by a brief list of status
information
ID ERPS ring identifier used in R-APS messages.
Enabled Shows if the specified ring is enabled.
West I/F Shows information on the west ring port for this node.
East I/F Shows information on the east ring port for this node.