ECS4100 Series CLI Reference Guide-R07

Chapter 9 | General Security Measures
DHCPv4 Snooping
– 329 –
Syntax
ip dhcp snooping information option tr101 board-id board-id
no ip dhcp snooping information option tr101 board-id
board-id – TR101 Board ID. (Range: 0-9)
Default Setting
not defined
Command Mode
Global Configuration
Example
This example sets the board ID to 0.
Console(config)#ip dhcp snooping information option tr101 board-id 0
Console(config)#
ip dhcp snooping
information policy
This command sets the DHCP snooping information option policy for DHCP client
packets that include Option 82 information. Use the no form to restore the default
setting.
Syntax
ip dhcp snooping information policy {drop | keep | replace}
no ip dhcp snooping information policy
drop - Drops the client’s request packet instead of relaying it.
keep - Retains the Option 82 information in the client request, and
forwards the packets to trusted ports.
replace - Replaces the Option 82 information circuit-id and remote-id fields
in the client’s request with information about the relay agent itself, inserts
the relay agent’s address (when DHCP snooping is enabled), and forwards
the packets to trusted ports.
Default Setting
replace
Command Mode
Global Configuration
Command Usage
When the switch receives DHCP packets from clients that already include DHCP
Option 82 information, the switch can be configured to set the action policy for
these packets. The switch can either drop the DHCP packets, keep the existing
information, or replace it with the switch’s relay information.