ECS4100 Series CLI Reference Guide-R07

Chapter 8 | Authentication Commands
PPPoE Intermediate Agent
– 291 –
◆ At least one trusted interface must be configured on the switch for the PPPoE
IA to function.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent trust
Console(config-if)#
pppoe intermediate-
agent vendor-tag strip
This command enables the stripping of vendor tags from PPPoE Discovery packets
sent from a PPPoE server. Use the no form to disable this feature.
Syntax
[no] pppoe intermediate-agent vendor-tag strip
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command only applies to trusted interfaces. It is used to strip off vendor-
specific tags (which carry subscriber and line identification information) in PPPoE
Discovery packets received from an upstream PPPoE server before forwarding
them to a user.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent vendor-tag strip
Console(config-if)#
clear pppoe
intermediate-agent
statistics
This command clears statistical counters for the PPPoE Intermediate Agent.
Syntax
clear pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Stack unit (Range: 1)
port - Port number (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)