ECS4100 Series CLI Reference Guide-R07

Chapter 4 | System Management Commands
Cloud Management
– 102 –
mgmt This command enables or disables the cloud management agent for the switch.
Syntax
mgmt {enable | disable}
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆ Setting the cloud management agent to enabled allows the switch to be
managed through the ecCLOUD system after the next reboot. By default, the
cloud management agent is disabled.
◆ After setting the cloud management agent to enabled or disabled, it requires a
reboot of the switch to take effect.
Example
Console(config)#mgmt enable
Console(config)#
mgmt loglevel This command sets the minimum level for cloud management agent logging
messages. Use the no form to reset to the default level.
Syntax
mgmt loglevel level
no mgmt loglevel
level - The minimum logging level. (Options: trace, debug, info, warn, error)
Default Setting
Info
show mgmt status Displays the cloud management agent status PE
show mgmt version Displays the cloud management agent code version PE
show mgmt log Displays log messages from the cloud management agent PE
show mgmt option Displays the cloud management agent configuration
options
PE
Table 9: Cloud Management Commands
Command Function Mode